The Lab Guestbook

Here are some comments posted by other visitors to metallography.com.

Quite an interesting site,it gives you an head start fro your metallography study .like to get to know much about peoples perspectives on metallography.Thank you Dr Mohammed Liman
Mohammed Liman
Abuja, ng Nigeria - Saturday, June 26, 2004 at 12:02:01 (EDT)

Very nice site, indeed.
Tracey Keita
- Wednesday, June 23, 2004 at 17:18:34 (EDT)

Nice site, thanks
Visitor
USA - Wednesday, June 23, 2004 at 13:36:17 (EDT)

THank you for the site! Interesting!
RIch
- Tuesday, June 22, 2004 at 22:01:31 (EDT)

i dey here my man!!!!!!!!1
guyman
- Tuesday, June 22, 2004 at 15:56:45 (EDT)

Very nice site.
Biff Pileon
USA - Tuesday, June 22, 2004 at 12:06:14 (EDT)

Very nice site.
Biff Pileon
USA - Tuesday, June 22, 2004 at 12:06:02 (EDT)

Very nice site, lots of useful information. Glad I found it!
Amber
- Sunday, June 20, 2004 at 22:16:40 (EDT)

good
hjsakd
new york, usa - Sunday, June 20, 2004 at 09:07:20 (EDT)

Nice site, God bless.
Rev. Mark David
- Sunday, June 20, 2004 at 01:39:50 (EDT)

I'm lovin it
Fred
- Saturday, June 19, 2004 at 05:05:58 (EDT)

Wonderful site.
Geraint Jones
- Friday, June 18, 2004 at 03:58:09 (EDT)

Best wishes
Irwin Fletcher
Louisville, KY USA - Thursday, June 17, 2004 at 21:01:40 (EDT)

Very useful site, especially for a company like ours with interests in mining semi-precious metals and base material for alloys
Marcus Fry
- Thursday, June 17, 2004 at 08:37:34 (EDT)

The page was very informative, thank you.
Jan Mayen
- Saturday, June 05, 2004 at 07:50:00 (EDT)

..........
bob james
- Thursday, June 03, 2004 at 20:13:15 (EDT)

interesting site
Jen
- Thursday, June 03, 2004 at 04:27:23 (EDT)

Nice site! I enjoyed reading it :)
Louis
- Monday, May 31, 2004 at 16:31:53 (EDT)

cool site
simon egan
UK - Saturday, May 29, 2004 at 11:04:23 (EDT)

go
helbody
- Saturday, May 29, 2004 at 08:13:01 (EDT)

Thank you. I liked your site. Good Job!
Vicco von Buelow
- Friday, May 28, 2004 at 19:23:34 (EDT)

Nice
mlinard@hot.rr.com
- Thursday, May 27, 2004 at 09:13:29 (EDT)

Good site
Lee
- Wednesday, May 26, 2004 at 15:54:26 (EDT)

Love your site - best wishes from Germany! :-)
Hannes
Germany, - Friday, May 21, 2004 at 08:28:56 (EDT)

hi
max
sunvil, 27 southafrica - Tuesday, May 18, 2004 at 07:07:30 (EDT)

metallurgist
hamid reza
tehran, tehran iran - Sunday, May 16, 2004 at 04:12:10 (EDT)

Great site
Cohen Technology llc
Cranston, RI USA - Tuesday, May 11, 2004 at 10:13:41 (EDT)

A very nice site.
mugu guyman
aba, lome togo - Tuesday, May 04, 2004 at 06:38:08 (EDT)

I am student of MetalEng in IUST. It is very nice website. Thanx.
Meysam Ahmadifard
Tehran, Iran - Friday, April 23, 2004 at 09:03:20 (EDT)

Hi! Thanks for helpfull site. Cumpliments
Paula Correia
Trofa, Portugal - Monday, April 19, 2004 at 04:40:57 (EDT)

please sen for me a guestbook.
mojtaba naghavi
arizona, ar mndb - Tuesday, April 13, 2004 at 00:49:33 (EDT)

My husband worked for Mintech for 9 years and now we're waiting for his teeny tiny pension cheque from Mintech
Roberta Ludke
Sault Ste Marie, On Canada - Wednesday, January 07, 2004 at 16:23:14 (EST)

very nice web side....
Mufit Yalcin
Bonaire, GA USA - Monday, December 29, 2003 at 21:29:52 (EST)

i would like to see the guest book
prasad
india - Friday, December 19, 2003 at 13:37:13 (EST)

Graduate Metallurgy Engineer from Division of Metallurgy, Department of Mining Engineering, Institut Teknologi Bandung (ITB), Indonesia---Excellent & cool website!!! This website, the analytical and logical thinking which I learnt during my year in Metallurgy gave me a great knowledge.Rgrds & God Bless...
David Tamorron Musu
Jakarta Selatan, Indonesia - Wednesday, December 10, 2003 at 21:44:20 (EST)

..looking to purchase a blown up poster of steel photomicrograph. Please send more info. Thanks.
Chris Tobia
Baltimore, MD - Wednesday, November 26, 2003 at 19:36:48 (EST)

Thank you and Good luck
Dr.Mohamed Hameda Alaalam
Tripoli, Tajoura Libya - Thursday, November 13, 2003 at 17:57:29 (EST)

INTERESTING SITOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
MUGU
ACCRA, GHANA - Friday, October 24, 2003 at 14:41:19 (EDT)

at last!!! I don't know what I'm doing yet, but I found you. Expect to have address shortly. But I finally got your dad in your guest book.At last.Love, Dad
john stewart jr.
St. Pete, florida usa - Saturday, October 18, 2003 at 10:59:15 (EDT)

very informative & useful site. inspired to be one of members of it.
Raju Trivedi
Rajkot, Gujarat India - Saturday, July 19, 2003 at 03:33:05 (EDT)

I want to find the sic waterproof abrasive paper for metallographic using.(brand name:DURACUT) Who can help me?
James Lv
Zhuhai, Guangdong China - Tuesday, July 08, 2003 at 10:55:21 (EDT)

I would like to meet some metallographer to learn more about aluminium alloys.
Fabrizio
Belluno, Italy - Thursday, May 29, 2003 at 09:06:48 (EDT)

How
marcus cridland
london, uk - Wednesday, May 07, 2003 at 03:56:26 (EDT)

Nice site, very informative. I've been in the "Biz" for about 14 years.
Mike Rust
Portland , OR USA - Monday, April 21, 2003 at 16:00:56 (EDT)

Hey I really like your site. I have found some of the information here helpfull. Thanks :)Joe D.
Joe
Memphis, TN US -

in the name of ALLAH i enjoyed seeing this site regards
Meysam
Tehran, - Saturday, January 04, 2003 at 13:37:38 (EST)

metallurgy student at kocaeli university great site I want to meet another metallurgy student write me.
emre
kocaeli, Turkey - Friday, December 13, 2002 at 14:13:20 (EST)

hiiiiiiiii
abdelkader attia
alex, alex egypt - Sunday, November 24, 2002 at 20:11:53 (EST)

hi folks,i am studying metallurgy in IUST university in IRAN,and as a project for metallography Lab i decide to design a site including metallographic aspects of ferrous and non-ferrous alloys,i'll be glad if you take a look at these pages.(http://www.geocities.com/metallographylab) Thanks NIMA
nima
Tehran, Iran - Sunday, July 28, 2002 at 02:01:13 (EDT)

This is one of the most complete websites I've found.I'll be back!
G.Calle
- Wednesday, July 03, 2002 at 01:55:15 (EDT)

Who know material properties for IN-738LC and NicocrAly? I really need both material properties
ZAL <
- Tuesday, July 02, 2002 at 03:57:58 (EDT)

Its really a worthy website for the metallurgical community. thanks for developing this worthy work.
Muhammad Nawaz
Sambrial, Sialkot, Punjab Pakistan - Sunday, June 23, 2002 at 08:20:28 (EDT)

I m first time coming across such site over the metallography......... it is really great.... i want to keep in contact with this so let me know whenever site upgrading occurs........
kumar
Mumbai, Maharashtra India - Monday, June 17, 2002 at 06:09:38 (EDT)

I am a Romanian metallurgist. I try to develop a data base with defected metallic structures. Iron, steel, copper and aluminum alloys. I will be happy to receive all your actual experience. Pictures will be well received. Many thanks in advance.
Sorin Stavarache
Bucharest, Romania - Wednesday, June 12, 2002 at 12:43:36 (EDT)

find aluminium alloy
sumarno
sukoharjo, s indonesia - Wednesday, June 12, 2002 at 04:42:06 (EDT)

This is one of the best site. you people are doing really a great job. you are giving proper solution of the problems. keep it up. regards, ratnakar
ratnakar kadikar
baroba, gujarat india - Sunday, June 09, 2002 at 12:10:36 (EDT)

I am very glad have a chance to find you and others, who work in metallographic field,though I have not gotten the field job now. Last year,I immigrated Canada from shanghai of P.R.C.. I have more than 10 years experience in the field.I am seeking in the field job again.If it is possible,I hope that I can fine the job through you and your website.If I can provide you with further information, please feel free to contact me either by phone at 416-493-6621 or e-mail at shuqiao_wang@yahoo.ca . Thank you for your help. Yours Sincerely, Shuqiao Wang
;
toronto, canada - Monday, June 03, 2002 at 15:25:20 (EDT)

I thing this wesite is necessary for me and the other scientist
cahyo sutowo ;
jakarta, indonesia - Monday, May 20, 2002 at 02:43:47 (EDT)

I am just completing my B.Eng in materials science and engineering at Brunel university in west london, uk and i found the site very informative; and was usful for my final year project. Cheers!
James Littmoden ;
Uxbridge, MDLSX Britain - Friday, April 26, 2002 at 12:16:13 (EDT)

A good overwiew approach to metallograpy. Many thanks. Excellent for young people starting their careers.
ana montez ;
Alverca, Portugal - Tuesday, April 09, 2002 at 14:16:20 (EDT)

it's a good site. tell me about the sites where i can get the microstructure images of steels with their database.keep informing about the further developments.thank you.
prasad ;
solapur, mh india - Tuesday, April 09, 2002 at 11:47:33 (EDT)

site is excellent.keep me informed time to time abt. jobs as a fresh metallurgical engg. graduate in south korea.
sourabh ghosh ;
calcutta, w.b. india - Tuesday, April 02, 2002 at 09:35:35 (EST)

I was tried to find more references for metallography of aluminum A356.0 so I found it. This is a Great Web Site. Congratulations for the owners.
Ricardo Sampaio ;
São Paulo, SP Brazil - Tuesday, March 19, 2002 at 14:18:35 (EST)

I am trying to find more referance for heat treatment of 1045 steel.So I can work on my book report, I am taking a class in material engineering.
Bruce <GBruceB@aol.com>
MEMPHIS, TN USA - Monday, March 11, 2002 at 20:10:45 (EST)

i'm the student of material engineering at sepuluh nopember institute of technology.i'm very like this website,because i can get a lot of information about metals and materials,which support me become the material engineer.
Denny.P <spy_denny@yahoo.com>
surabaya, indonesia - Thursday, March 07, 2002 at 08:04:12 (EST)

i'm the student of material engineering at sepuluh nopember institute of technology.i'm very like this website,because i can get a lot of information about metal and materials,which support me become the material engineer.
Denny.P <spy_denny@yahoo.com>
surabaya, indonesia - Thursday, March 07, 2002 at 08:02:19 (EST)

i found it very good. now i understand more about it.thank for the web. it great.
elizabeth shuman <shuray60@yahoo.com>
jefferson, ark. u.s.a. - Wednesday, January 30, 2002 at 22:47:19 (EST)

Wonderful site. Your links are particularly good and up to date.
Sid Nemzer <snemzer706@aol.com>
CA - Thursday, January 24, 2002 at 23:51:51 (EST)

very helpful and splendid site
boonsiri sanguanthai <boonsiri55@hotmail.com>
bangkok, thailand - Thursday, January 10, 2002 at 04:38:03 (EST)

nice site. very informative.
- Edward
FL USA - Monday, December 31, 2001 at 02:38:35 (EST)

Very interesting site. I'd like to see more of images gallery with microstructures of failure cases
D.V.SRINIVASAN <ms@epc.ltindia.com>
Mumbai, Maharashtra India - Saturday, December 22, 2001 at 00:09:57 (EST)

Great site!
Marty Plutowski <martin.plutowski@med.ge.com>
Milwaukee, Wi USA - Wednesday, October 17, 2001 at 16:29:47 (EDT)

Keyence UP manufactures 2.11 megapixel CCD digital microscopes. Hope this URL may be useful. Regards Keith http://www.keyenceup.com
Mr Godden <keith-g@keyence.co.jp>
- Monday, August 27, 2001 at 06:09:16 (EDT)

I have found this website to be an excellent source of information. Keep up the good work! Thank you, Rafael
Rafael Castrejon <www.rafael.castrejon@goodrich.com>
Chula Vista, CA USA - Monday, August 20, 2001 at 16:55:17 (EDT)

What a great site! very simple but very informative. KEep the good job!
Gita Manggala <the_gfamily2001@yahoo.com>
Jakarta, Indonesia - Saturday, July 28, 2001 at 08:53:17 (EDT)

After a brief visit, the site appears to be interesting and helpful. I'll have to come back.
David Behnke <dbehnke@the-mandp-lab.com>
Schenectady, NY US - Friday, July 20, 2001 at 09:57:16 (EDT)

It's the first time I have visited the site. It's very helpful for ones who are interested in metallography. I am responsible in courses involving microstructures of metals, at the faculty of science (Department of Materials Technology) Ramkhamhaeng University in Bangkok, Thailand. See you.
Sanguanthai Boonsiri <boonsiri55@hotmail.com>
Bangkok, Thailand - Sunday, July 15, 2001 at 04:56:11 (EDT)

A very applicable site; I use this as a reference to my students and suppliers alike.
Brian Shar <bshar@stoneridge.com>
Warren, OH USA - Tuesday, May 15, 2001 at 12:42:08 (EDT)

A MOST INTERESTING AND HELPFUL SITE.
douglas moore <dmoore14@FORD.COM>
DEARBORN , MI US - Tuesday, April 10, 2001 at 11:52:23 (EDT)

Very exciting cite ! It is very helpfully for me in Indonesia, because the references on my university limited.
Henry Ako Tampubolon <henryako@edc.ms.itb.ac.id>
Bandung, Indonesia Indonesia - Wednesday, April 04, 2001 at 04:14:42 (EDT)

A fantastic site! for fresh and experienced Metallurgist to learn and impart knowledge in the field of Metallurgy.I am BE(Metallurgy- MSU Baroda), MBA(Marketing-DAVV-Indore)and MS (Quality Management-BITS Pilani). And like to pursue Phd. in the field of TQM, which shall be helpful to me for my proffesional growth in the present competitive environment. Guidance for above and best opportuinities is solicited.
Pradeep Verma <pkvm@rediffmail.com>
New Delhi, India - Friday, March 30, 2001 at 02:01:35 (EST)

Excelente sitio! mucha informacion valiosa bien asociada, recomendare su visita a mis alumnos y colegas del Dpto. de Metalurgia del Istituto Universitario de Tecnologia de Maracaibo. Mantengan el sitio
Angel E. Marquez N. <angel_marques@cantv.net>
Maracaibo, Zulia Venezuela - Wednesday, March 21, 2001 at 23:54:45 (EST)

Nice site:-)
James D. Brockman <Jimbo@accesstoledo.com>
Toledo, OH USA - Monday, March 19, 2001 at 14:21:33 (EST)

I have been looking for a site like this and finally found one this site really very very informative espacially for metallography
yusup setiawan <use.up@usa.net>
surabaya, eastjava indonesia - Saturday, March 10, 2001 at 01:40:24 (EST)

I have just found the site and read acouple of the articles. if they are all that good the site will be very useful to me. Good luck.
Jim Wood <ninelands@supanet.com>
Houghton le Spring, Tyne and Wear England - Tuesday, February 27, 2001 at 07:08:38 (EST)

Great Site! I have been looking for a site like this and finally found one. I deal with this stuff daily and am always looking for examples for training or comparison purposes. I hope you have the opportunity to update photomicrographs regularly. I may even submit some photos of my own someday. Thanks
Mike Toole <mtoole@bodycote-na.com>
Tulsa, OK USA - Saturday, February 24, 2001 at 16:29:31 (EST)

Thank you for maintaining such an interesting site. Knowledge is impowerment.- dwj
D.W.Jenks <DavidJ@Wescoair.com>
Valencia, Ca USA - Friday, February 23, 2001 at 11:47:02 (EST)

being a student of metallurgy I found this site really very very informative espacially for metallography
Abdul Jawad Mirza <jawad_mirza1@yahoo.com>
jalal pur jattan, gujrat, Pakistan - Saturday, February 10, 2001 at 11:58:55 (EST)

I'm an metallurgical engineer. I'm working in heat treatment. Specially I'm interested with microstructure
Necdet KARAGÜLLE <necdetkaragulle@hotmail.com>
BURSA, TÜRKÝYE - Saturday, February 03, 2001 at 06:06:17 (EST)

Couldn't believe my luck in finding your site. Great job, keep up the great site and thanks!
Greg Bromwell <gbromwell@hotmail.com>
Cincinnati, OH - Saturday, January 20, 2001 at 11:59:24 (EST)

This site is a good source for people trying to learn more about metallography. The panel of experts has been a big help. Thanks, Steven
Steven Holland <oslholland@hotmail.com>
AR USA - Friday, January 19, 2001 at 15:07:32 (EST)

I'm a metallurgist at I.T.T. (Italian heat treatment industry); I found this web really interesting.
Francesco Burdisso <francesco.burdisso@grazianotrasmissioni.it>
TURIN, ITALY - Friday, January 12, 2001 at 06:13:24 (EST)

ALTHOUGH I HOPEFULLY KNOW NON DESTRUCTIVE TESTING AFTER 25 YEARS I CAN LEARN A LOT FROM THIS SITE
SAM WARD <info@ndtdatabase.com>
Blackpool, L U.K. - Tuesday, January 09, 2001 at 14:16:16 (EST)

Its very helpful for students. Good wishes
Abdul Faheem Khan <faheem_khan_1977@yahoo.com>
Multan, Punjab Pakistan - Friday, January 05, 2001 at 07:50:11 (EST)

A fantastic site! for fresh and experienced Metallurgist to learn and impart knowledge in the field of Metallurgy.I am BE(Meyallurgy- MSU Baroda), MBA(Marketing-DAVV-Indore)and MS (Quality Management-BITS Pilani). And like to pursue Off campus Phd. programme in the field of Quality Management on very good topic form good University,which shall be helpful to me for my proffesional growth in the present competitive environment. Presently Iam working as Senior Editor(Metallury) with a multinational company in to the business of publishing Standards.ie.Metals,NonMetals and all other general standard. Guidance for above and best opportuinities is solicited.
Pradeep Kumar Verma <metals.sdpl@spectranet.com>
New delhi, Delhi INDIA - Friday, December 29, 2000 at 03:17:20 (EST)

I am researching about "treating cast iron with SiC". I will be very pleased if you help me in this project. with all good wishes
Kaveh Edalati <kaveh_ed@chemeng.net>
Tehran, Tehran Iran - Monday, December 25, 2000 at 09:17:08 (EST)

A nice site.
werner bossuyt <werner .bossuyt@belgacom.net>
gent, belgium - Sunday, December 10, 2000 at 17:47:08 (EST)

iam looking for the standarts of the metarials which are used in powder metallurghy like FN-0208 please help me
emre ugurlar <eugurlar@veezy.com>
kütahya, turkey - Saturday, December 02, 2000 at 07:13:05 (EST)

A useful site for suppliers of tungstenproducts.
Jason - Buffalo Tungsten <jason987654321@hotmail.com>
Buffalo, NY USA - Tuesday, November 21, 2000 at 01:49:01 (EST)

merhaba ben çeliklerde mikroyapý incelemesi hakkýnda bilgi topluyorum.özellikle fotograflar.bilgi ve dökümanlarýnýzý benimle paylaþmak isterseniz mailinizi bekliyorum.Teþekkürler...
umit <uumitt@hotmail.com>
IST, - Thursday, November 09, 2000 at 19:40:54 (EST)

I am looking for one used metallurgical binocular microscope with incident lighting. i.e. a prism in the eyepiece to split the light beam. Thanks
Ross <trident@eis.net.au>
Brisbane, Qld Australia - Tuesday, November 07, 2000 at 07:01:53 (EST)

WE ARE A SPRING MFG. AND ARE LOOKING FOR A LAB THAT CAN DO ANALISYS ON BROKEN MECANICAL SPRINGS. DO YOU HAVE ANY LABS IN THIS AREA?
RUBEN ARSINIEGA <RARSINIEGA@AOL.COM>
TAYLORS, SC USA - Thursday, October 26, 2000 at 07:52:17 (EDT)

I am a student of metallurgy
ali aghajani <everend@mail.dci.co.ir>
tehran, iran - Wednesday, October 18, 2000 at 11:52:20 (EDT)

dear sir I am a mechanical engineering student at Sepuluh Nopember Institute of technology surabaya Indonesia I have a problem about the biological corrosion (do you have some references about it?) and i have a problem with cast iron welding (do you have any journal for it?) thank you for your help sincerely yours --
kunhend <kunhend@usa.net>
surabaya, 62 indonesia - Monday, October 16, 2000 at 09:32:20 (EDT)

This sight is cool. I can really find some great info for my project.
Lindsay <Sorry. I don't have one>
Jacksonville, FL USA - Tuesday, October 10, 2000 at 20:45:38 (EDT)

I am just starting my GCSE's this year and i have founbd your wbsite very helpful, I would just like to give my thanx to all the science geeks who took their own time getting this site together - thanx guys!!!! loads 'a' luv loz
loz <angel-eyes_uk@chickmail.com>
England!!!, - Thursday, September 21, 2000 at 16:45:28 (EDT)

This is a great web site. I teach welding metallurgy at Utah State University/Welding Engineering Technology. This site is a great resource, I will visit it often. Thanks!
Mark R. Baugh <mrb@cc.usu.edu>
Logan, Ut USA - Thursday, September 14, 2000 at 11:13:09 (EDT)

Metallography.com is very informative and useful for metallurgy students like me. I hope to learn more about sample preparation and analysis in the future. Thanks for the info!
Red Canoza <red.canoza@mailcity.com>
Manila, Philippines - Tuesday, August 15, 2000 at 03:19:05 (EDT)

the most frequent web i've visited.
danang <dante@material.itb.ac.id>
Bandung, Indonesia - Wednesday, June 28, 2000 at 21:21:55 (EDT)

This was the first place I came upon in a web search; I really lucked out. We are going back into metallography for the first time in years and I was unsure of where to start until I came here. This is a very comprehensive site, with plenty of good info and links and has helped me to a good start for our progam. Thanks.
Joe Cruse <jcruse@ccmetals.com>
Calvert City, KY USA - Monday, June 12, 2000 at 16:39:07 (EDT)

Are there any collections of metallurgical microscopes in the US ?
George Langford, Sc.D. <amenex@amenex.com>
West Chester, PA USA - Friday, June 09, 2000 at 13:42:14 (EDT)

First of all, thanks for preparing for this fine site. I wanna know how to make so-called "Murakami reagent". If you have any idea about the composition of it, please let me know what you knew. Again thanks for your favor of making this cool site. Bye!!!
Yoon Hyung Suk <unforgiven2@hanmail.net>
Seoul, Korea, South - Thursday, June 08, 2000 at 02:00:26 (EDT)

Your site is the greatest metallographic resource on the web. Nowhere else can one find articles, facts, and links of such metallographic significance in one place. Keep up the good work! Outstanding site. Jeff Davis Metallographic Technician Special Metals, Inc.
Jeff Davis <wdavis@smcwv.com>
Huntington, WV USA - Friday, June 02, 2000 at 02:43:51 (EDT)

Mark V Laboratory is a of metallurgical supply and equipment business.We are interested in being listed and linked to our on-line catalog at URL markvlab.com. Please contact me with information and pricing.1-800-243-9776
Mark Villeneuve <MNV56>
East Granby, CT USA - Tuesday, May 23, 2000 at 17:08:40 (EDT)

Mark V Laboratory is a metallurgical supply and equipment business. If you check our URL you can visit our site and see our cuurent catalog. We would be very interested in being listed at your site with a link to our site. Please call 800-243-9776, fax 860-653-7201 or E-mail me details. Thankyou, Mark Villeneuve
Mark Villeneuve <MNV56>
East Granby, CT USA - Tuesday, May 23, 2000 at 17:02:18 (EDT)

hi
stuart wilson <wwilsonss@ukonline.co.uk>
chelmsford, england - Monday, May 15, 2000 at 10:15:51 (EDT)

I´m agree, this is the best page at internet about metallurgical topic. I have a question. ¿Could you help me with information about the enviroment conditions to Metalurgical Labs?, for example a) Temperature b) Humidity, or anothers Someone could you give me this information regards Jaime Nava (VIVA MEXICO)
Jaime Nava Villagómez <jnava.forjas@spicer.com.mx>
Querétaro, MEXICO - Tuesday, May 02, 2000 at 17:20:56 (EDT)

Student
Omar Shair-ali <Omar@shair-ali.com>
Pinole, CA USA - Tuesday, April 25, 2000 at 00:29:21 (EDT)

A good site. Things have certainly changed since I started in Metallurgy almost forty years ago. Keep up the good work.
Tim Carter <tcarter@csir.co.za>
Johannesburg, South Africa - Friday, April 14, 2000 at 03:32:03 (EDT)

First visit
Terry Linders <tlweld@vianet.on.ca>
Gravenhurst, ON Canada - Thursday, March 23, 2000 at 13:55:04 (EST)

First let me say how happy I am for a website like this. It really opens a door of learning experience for me. I am presently living in Jamaica. I hope to travel to the States, NY 11226. I am seeking a part time job for about 2 months or more as a lab. technician. I am currently the Senior Lab. technician at the Metallurgy Department at a company in Jamaica. I am able operate the DENISON TENSILE TESTING MACHINE (computer upgraded) which deals with Tension and compression testing on reinforcing steel bars, circular tubes, flat bars and rods. I can operate the Vickers and Rockwell Hardness tester, plus the EQUOTIP Hardness tester. I have the ablility to conduct non destructive testing using Liquid Dye Penetrant testing, Magnet Particle testing and Ultrasonincs. I can write techncial reports, and I am also good at writing computer programs in basic and visual C. I have a University Higher Certificate and have a Diploma pending. I am a hard yet honest worker and prepares to deliver my work on time. I have 5 years working experience in this field. I also have a Driver's licence. Please if you or anyone is interested in my skills, please contact me at the about email address of at , RICHARD MORRIS 6 Winchester Road Kingston 10 Jamaica, W.I. Tel: (876) 926-3140-5 (Work) Thank You! Richie
Richard Morris <luxury98@yahoo.com>
Kingston, Jamaica - Sunday, March 12, 2000 at 18:25:23 (EST)

It is a very useful site to people that works with process casting
Dilmo Rocha Magalhães <dilmo.rocha@dana.com>
São Paulo, SP Brasil - Friday, March 03, 2000 at 12:03:56 (EST)

GREAT SITE
Mauricio Lisboa <mbl@cepel.br>
Rio de Janeiro, RJ Brazil - Monday, February 28, 2000 at 07:08:05 (EST)

Congratulations on an extraordinary website and hats off for taking the time and effort to prepare and present such a marvelous collection of information. It will be invaluable to us all. Thanks again and PLEASE continue.
Ronald G. Jones <rjones@hilltop.bradley.edu>
Peoria, IL USA - Thursday, February 24, 2000 at 09:40:15 (EST)

the photos can be used for webpage design(anybody thought before?)very qualified by means of theory of the work thanks...
Can Uckan <cuckan@hotmail.com>
Izmir, Turkey - Sunday, February 06, 2000 at 17:44:58 (EST)

Excellent info., wish I had this resource years earlier
Mike Bolt <mikeabolt@hotmail.com>
Houston, TX USA - Thursday, February 03, 2000 at 10:49:52 (EST)

Great site; very informative.
Gregory W. Dexter <gwdexter@earthlink.net>
N. Scituate, RI USA - Sunday, January 16, 2000 at 12:25:10 (EST)

Thanks..your site helps me a lot.
Mestika Hapsari <ika98@hmm.ms.itb.ac.id>
Bandung, Indonesia - Friday, December 31, 1999 at 19:50:45 (EST)

My first visit.Interesting but wish there you had more metallograph photos.Also some more information on steel heattreatment.
Pratap Ghorpade <pratapg@usa.net>
Bangalore, India - Saturday, December 18, 1999 at 00:54:17 (EST)

Brilliant site, just what I needed for my work, thanks!! and keep up the good work. I've told all my fellow students and my lecturers about it, and they all love it. Phil the Poor, BSc Hons C.A.D.E.
Phil Tebbs <scary@bluecarrots.com>
Teesside, England UK - Wednesday, December 08, 1999 at 16:04:12 (EST)

Great Site--I can't wait for the address to send my entries for Y2K!!! Let us all know!!!
Charles Driesler <charles.driesler@alliedsignal.com>
Torrance, Ca USA - Thursday, November 11, 1999 at 16:51:04 (EST)

Nice photos, perfect site. 3/11/99 -National Technical University of Athens
Dimitrios Karalis <d_karalis@hotmail.com>
Athens, Greece - Thursday, November 04, 1999 at 08:57:35 (EST)

Very good. I work in Bologna University(Metallurgy Departement) and i like this site !!!!
Simone Messieri <messa@wappi.com>
Bologna, Italy - Saturday, October 30, 1999 at 09:37:56 (EDT)

TAKING 1ST CLASS IN METALLURGY AT COLLEGE. LOOKING FOR INFO & REF MATERIAL IE. PHOTOS. FREE!!!! POOR STUDENT.
C. ARINGTON <RECH@TRITON.NET>
BEULAH, MI USA - Thursday, October 21, 1999 at 04:56:34 (EDT)

I love your site - a real hit!
Edward J. Dolan III <ed@horsburgh-scott.com>
Cleveland, OH USA - Monday, October 18, 1999 at 20:13:02 (EDT)

Really a must-visit site for people interested in the wonderful field of metallography. Gives a nice outlay for the basics of metallography. But it would be great if you could include the in depth description of the principles behind , and the construction & theory behind the illumination techniques. Also please include information regarding the effects obtained by using two illumination techniques simultaniously , and the comparison involved for them.
amit soneja <meeraudyog@indiamail.co.in>
mathura, U.P. INDIA - Thursday, August 26, 1999 at 12:55:46 (EDT)

Excelent, very good site. Congratulations.
Carlo Alexandre Zanutto <carloaz@netsite.com.br>
São Joaquim da Barra, SP Brasil - Tuesday, August 17, 1999 at 21:04:44 (EDT)

Thanks for your web-site, it my turn out to be the answer to my needs! Bless you all for the work time you put forth to help others!
Richard W. Bates,PhD. <sieraimprs@aol.com>
Clovis, Ca USA - Tuesday, August 17, 1999 at 20:55:37 (EDT)

I show your site to all I know. It's helped me a lot. I just love it all. My class at U.A.A. likes it too.
john jameson <jjameson@buckland.nwadsd.schoolzone.net>
anchorage, ak usa - Sunday, August 15, 1999 at 22:10:30 (EDT)

Great Site! I'm a repeat visitor and love looking around your site! I miss working with you on this stuff! My best to you, Scarlett
Scarlett <scarlett@gwtw.net>
- Friday, August 13, 1999 at 00:10:22 (EDT)

THANKS A LOT FOR YOUR ADVICE ON HOW TO GET FLOW LINES ON TURBINE BLADES MADE OUT GREEK ASCOLOY.I GOT A NICE PICTURES.
ANTONIO F GRANDA <AMARRERO@PTMINTL.COM>
MIAMI, FL USA - Monday, August 02, 1999 at 07:43:36 (EDT)

I am a diploma student at the Wits Tech and i found this very interesting
Lwazi <tenge4@hotmail.com>
johannesburg, south africa - Wednesday, July 14, 1999 at 06:41:20 (EDT)

NICE JOB. VERY INTERESTING SITE.
DENNIS BRENEISER <DENNISVSL@AOL.COM>
LINCOLN, RI USA - Tuesday, June 22, 1999 at 12:09:23 (EDT)

IT IS THE FRIST AND THE BEST SITE ON THE NET ABOUT METALLURGEYTHAT I HAVE COME ACROSS
CHAITANYA G.S.N. <anuradha@hd2.dot.net.in>
HYDERABAD, ANDHRAPRADESH INDIA - Thursday, June 17, 1999 at 13:24:32 (EDT)

Excellant site; metallographic work was my first exposure to the science of metallurgy.
Gregory W. Dexter <gwdexter@earthlink.net>
N. Scituate, RI USA - Saturday, June 05, 1999 at 07:53:40 (EDT)

Glad to see your TechNotes article is in your site. I've been looking forward to reading the whole thing since I glanced at a copy recently. Great job!
Sally Zeller <ssrazell@nfdc.net>
Felton, PA USA - Thursday, May 06, 1999 at 14:53:41 (EDT)

Very good and helpful!It's necessary higher change of practice.
Emanoel R. de Almeida <ealmeida@splicenet.com.br>
Sorocaba, SP Brazil - Monday, April 12, 1999 at 12:50:30 (EDT)

Very informative and well laid out. Easy accesss to information.Currently attending Royal Melbourne Institute of Technology (RMIT) Secondary Metallurgy
Tony Smyth <t_smyth@one.net.au>
Melbourne, Vic Australia - Thursday, April 01, 1999 at 18:08:12 (EST)

Useful site, particularly for references to suppliers. I noticed you have a darkroom in your lab tour. Does anyone still use one, I thought everyone had gone digital by now, even I have. Why are Reichert not listed in your metalograph suppliers. Theirs are probably the finest in the world.
<peterjb@indigo.ie>
- Sunday, March 21, 1999 at 18:29:52 (EST)

I am a repair spec. always seeking information so I can perform better. Tanks
Bo Turton <robert.turton@bbaproject.com>
Dallas, Tx USA - Tuesday, March 16, 1999 at 17:14:46 (EST)

I've been a metallographer for years and still hav lots of questions!
Roger A. Burlingame <RABURLINGAME@juno.com>
Bear Lake, Pa USA - Monday, March 08, 1999 at 09:38:58 (EST)

Like to see some new material.
Todd Steckley <toddsteckley@yahoo.com>
stuart, - Monday, March 01, 1999 at 14:07:55 (EST)

Good information. Have anything of Scanning Electron Micro-scope.
Tony B. Curtis <tee4money@aol.com>
Augusta, GA - Friday, February 19, 1999 at 00:50:27 (EST)

I hope, It can help me to do my research in Dept. of Metallurgical, Indonesia Univerity
Mohamad Isa Safardi <isfar@cbn.net.id>
Jakarta, Indonesia - Thursday, February 04, 1999 at 10:46:06 (EST)

Dropped in for Titantic Info., but was a nice discovery to read about metallurgy and find out what going on in that Titainuim plant practically in my back yard. Great Site!
Mary Ann Costa <mcbeader@aol.com>
Las Vegas, NV USA - Tuesday, February 02, 1999 at 22:14:04 (EST)

metallurgy student at Macomb College...web site is cool
James Hawthorne <TRUCK3491@aol.com>
Warren , MI u.s.a. - Thursday, January 07, 1999 at 00:21:33 (EST)

First time here great site looking for info concerning welding metallurgy, P.S.looking for welders in sunny Fl.
Kenny Scott <KScott8096@AOL.com>
Bradenton, Fl USA - Sunday, January 03, 1999 at 09:30:09 (EST)

304 stainless etch.....Frenches Reagent. 24 grams cupric Sulfate 280 mls H2O 120 mls HCL Immerse and agitate 3-6 seconds This reagent delineates general structure as well as austenite as it decompose (due to work hardening) to martensite. Works great on other alloys (cu, etc.)
Swampfoxx <HLeefre@aol.com>
USA - Saturday, December 26, 1998 at 12:10:33 (EST)

very good. this page was very informative for metallographers. thanks to jeff stewart.
imron <imron@jayapura.wasantara.net.id>
jayapura, indonesia - Saturday, December 19, 1998 at 22:20:18 (EST)

First time visitor, great web side, I really enjoyed it.
Mufit yalcin <Myalcin@ti.robins.af.mil>
Warner Robins, GA USA - Tuesday, December 15, 1998 at 13:50:47 (EST)

I work in the Lab at Valley-Todeco Inc. in Sylmar CA. We are a leading manufacture of aircraft fastners and bearings.
Chuck Walter <walter321@msn.com>
Sherman Oaks, CA usa - Monday, December 14, 1998 at 23:11:15 (EST)

I'm looking for an etch for 304 Stainless Steel to photo etch .005 inchs holes in .008 inch
James Olsefski <jim@transonic.com>
Ithaca, NY USA - Tuesday, December 08, 1998 at 12:03:18 (EST)

Very informative. Rekindled my interest in metallurgy. I am a non practicing graduate of Metallurgy.
myrna o. mercader <momerc@fastmail.i-next.net>
Manila, Philippines - Saturday, November 28, 1998 at 10:12:38 (EST)

Great site! I'am a metallographer at Kennametal Inc. in Orwell Ohio. It's nice to see a quality web site that I can relate to.
Susan Schafle <schafles@orwell.com>
Orwell, Oh USA - Saturday, November 21, 1998 at 18:39:53 (EST)

Excellent web site!
Jen <JenHelena@aol.com>
MA - Wednesday, November 11, 1998 at 17:36:26 (EST)

Looking for people with BS in metalurgy with 5+ years practical experience in heavy section gray iron casting. Either email or call.
Doug Welsh <basilone-oliver@worldnet.att.net>
pittsburgh, pa usa - Friday, October 23, 1998 at 11:36:11 (EDT)

Being an EE I had a rough time understanding metallography. Thanks to your website, I now have a better understanding. Thank you.
Monika Tso <mtso@ee.nmt.edu>
Socorro, NM USA - Wednesday, September 30, 1998 at 20:46:14 (EDT)

I really like this site because I found a great deal of info on Grain characteristics. Also, this site explained the ASTM standard method of measuring grain size which helps a lot on my senior project. Waahoo!
Kinch Chu <griffey@u.washington.edu>
Sea, WA USA - Wednesday, September 23, 1998 at 14:57:54 (EDT)

I'm so proud of you! You have done a terrific job and have tremendous skill. You are the best! Mr. Met Lab Webmaster.
Scarlett <scarlett@uevoli.yes>
- Friday, September 04, 1998 at 18:09:37 (EDT)

This sitte has been really helpful for my PhD research, thanks!
Karen Douse <k.douse@strath.ac.uk>
Glasgow, UK - Monday, August 31, 1998 at 08:10:46 (EDT)

A very COOL & WELL DONE website!
Rob Bruckner <bscstudent@hotmail.com>
N. Attleboro, MA USA - Thursday, August 27, 1998 at 13:32:47 (EDT)

Great site,I buy excess and secondary metals please advise if you have any product for sale
Emile Nemchik <STEELEX1@AOL.com>
Woodbury, NJ USA - Friday, August 21, 1998 at 14:09:58 (EDT)

I am looking for writing/editing/proofreading opportunities available in the material science field, in the S.F. Bay Area or out-of-state. I have an M.A. in English and Creative Writing, and I am a published writer. My background includes over five years in the private sector as a technical writer and communicator. In addition, my M.A. thesis project is based on interviews with numerous material scientists and researchers at Stanford, Caltech, U.C. Berkeley, and other institutions.
Owen Pietrokowsky <opietro@sfsu.edu>
San Francisco, CA U.S.A. - Thursday, August 20, 1998 at 16:34:09 (EDT)

I have not been activally doing metallography for a few years, but I do have 20 years experience. See Metals Progress, Dec.1974, p. 96. I would like to participate in "Ask The Expert" forum.
Glenn V. McIlhargie <gmcilhargie@lucent.com>
Columbus, OH - Thursday, August 06, 1998 at 14:04:53 (EDT)

an interesting and informative site . . . hope you add more features . . .
Delfin Maghuyop <tech4@natsteel.com.ph>
Iligan, Philippines - Friday, July 31, 1998 at 21:11:30 (EDT)

I wish I had known about this site when I was doing my undergrad degree! Great site, I plan to visit often. Hope you have some interesting fractographs & other failure analyses...my favourite metallurgical subject!
Meredith Clark <clark.stranges@sympatico.ca>
Canada - Monday, July 20, 1998 at 12:07:35 (EDT)

Great site, informative.
Raymond Nevarez <nevarez@marquardt.com>
Van Nuys, Ca USA - Monday, July 20, 1998 at 10:39:00 (EDT)

Anyone looking for an inexpensive digital camera for metallography should consider the professional model from Pixera. It offers excellent bang for the buck. I found it was superior to other cameras that were 5X the price.Anyone looking for image acquistion and database software should consider Quartz PCI. It doesn't do image/blob analysis, but it does a good job of colour/contrast manipulation and excellent archiving capabilities.Quartz Imaging CorporationWest Vancouver, B.C. VTW IP3CANADATel: 1 416 675 5860Fax: 1 416 675 0061PCI digital imaging managment system for SEM's, TEM's and LM's.
Wayne Brox <wayne_brox@bc.sympatico.ca>
Vancouver, BC CANADA - Thursday, July 16, 1998 at 17:11:37 (EDT)

This is a great resouce! Thanks folks.
<eheflin@sj.bigger.net>
- Tuesday, July 14, 1998 at 16:20:06 (EDT)

thanks for usefull informations. They helppredrag
Predrag Jovanic <pedjajov@tehfin.tehfak.ni.ac.yu>
Belgrade, yu - Friday, June 19, 1998 at 14:03:03 (EDT)

It's the site I've been seeking for.
Julio Noack <julionoack@hotmail.com>
Sao Carlos, SP Brazil - Friday, June 05, 1998 at 09:09:31 (EDT)

very interesting site
bill margolis <rsmwsm@flash.net>
ft. worth, tx USA - Friday, May 01, 1998 at 22:48:53 (EDT)

nice job. Congratulations.
FRANCO MIGLIORATI <bm@fresnet.it>
Offanengo, CR italy - Thursday, April 30, 1998 at 13:23:44 (EDT)

Need more information on various steel microstructure analysis
Badlishah Baharom <grnqcrd@tm.net.my>
Gurun, Kedah Malaysia - Wednesday, April 22, 1998 at 00:13:18 (EDT)

Excellent Web Site, I was interested in the ASTM Committee E-4 on Grain Size Measurements.
Ted A.Thompson <ccrider@microlink.net >
Overland Park , KS USA - Sunday, April 19, 1998 at 11:52:11 (EDT)

a friend sent me here looking for info on the Titanic.
jim Brumbaugh <if547@stratos.net>
mentor, OH USA - Wednesday, April 15, 1998 at 22:42:32 (EDT)

SINCE I HAVE TAKEN AN AMS COURSE IN CALIFORNIA I WANT TO JOIN IMS COULD YOU TELL ME HOW?
TERRENCE T.FERET <tferet@pica.army.mil>
albany, ny USA - Wednesday, April 01, 1998 at 09:31:39 (EST)

We produce & export silicon metal for metallurgical & chemicalused in China. We hope to exchange business information withthe friends within you site. We remain.
Tony Zheng <itgmnm@public.xm.fj.cn>
Xiamen, fj The P.R.of China - Wednesday, April 01, 1998 at 02:30:15 (EST)

Looking of gray cast iron density values relative to tensile strenght.
Roland O'Brien-Bills <36kingsb@superior.net>
Gloversville, NY USA - Saturday, March 21, 1998 at 09:09:33 (EST)

I am at the possition at the head of dept. of Material research in the institute for the technology of Nuclear and Other Raw materials citied in BBelgrade, 86 Franche d'Esperey St. Yu/Serbia. We are mainly concetreated at Inorganic and ceramic materials, with very litle excursions on metals. We have developed Our own Image analysis software called Ozaria, which could be picked up at the our web site starting from 1st of may.
Predrag Jovanic <pedjajov@tehfin.tehfak. ni.ac.yu>
Belgrade, YU Serbia - Tuesday, March 17, 1998 at 07:32:47 (EST)

In the name of GOD HELLo!. and thank you. I am a materils engineering student in TMU (A University in IRAN). I think this site will be useful for me
<me_masod@net1ef.modares.ac.ir>
TEHRAN, TEHRAN IRAN - Tuesday, March 17, 1998 at 03:24:34 (EST)

Metkon Instruments Ltd. has been manufacturing SamplePreparation Equipment since 1993. Please visit our web siteto learn more about us. We would be pleased if you couldadd our company name and address into your Vendors Data BaseThank you and Best RegardsSerdar Yavuz/Metkon
Metkon Instruments Ltd. <metkon@metkon.com>
Bursa, TURKEY - Saturday, March 14, 1998 at 08:48:06 (EST)

just got heree,I'm looking for melting point of metals , thank you
Owen Grant <ofg@together.net>
pownal , vt. USA - Tuesday, March 03, 1998 at 20:30:16 (EST)

Great Web site - the boys and I think this is one that we will frequent often. How often is the information updated? Thanks for setting up a site that we can actually benefit from.Laurie
Laurie Stewart <mcllab@fag-bearings.ca>
Canada - Tuesday, March 03, 1998 at 13:36:16 (EST)

I am waiting the letters from you with any questions
Larisa Korneva <dzenkor@nvkz.kuzbass.net>
Novokuznetsk, Russia - Tuesday, March 03, 1998 at 00:21:21 (EST)

This is my first visit to your web sit, and well done. Iam a amarture knife maker & metal worker and would love some help on finding planes and info on building a home forge.
michael hill <MDH24@juno.com>
oakley, CA USA - Sunday, March 01, 1998 at 03:35:12 (EST)

I'm a Materials Engineering Tech. Doing metallography at a naval submarine base. We work mostly with steels, nickels, coppers, and some titanium.
Richard Lowman <richard_lowman@trfkb-emh1.navy.mil>
Kings Bay, GA USA - Friday, February 27, 1998 at 07:26:43 (EST)

INFORMATIVE SITE ENJOYED IT I'LL COME BACK LATER FOR SURE
Frederick J Stoquert <R1537@aol.com>
chemung, NY USA - Wednesday, February 25, 1998 at 21:13:05 (EST)

I AM A MASTERS STUDENT IN MATERIALS ENGG IN WRIGHT STATE UNIVERSITY, I AM CURRENTLY WORKING ON ELECTROCERAMICS . I WOULD LIKE TO KNOW THE ETCHENT USED FOR PZT. SINCE I AM UNABLE TO LOCATE THAT IF YOU COULD HELP ME IT WOULD BE FINE. THANK YOU
NIRAJ MAHADEV <nmahadev@cs.wright.edu>
fairborn, oh USA - Wednesday, February 18, 1998 at 15:16:51 (EST)

This is an excellent site which offers a good variety of metallurgical data and tools that are applied in our dailywork!Suggestion: increase the gallery of pictures.
Piotr KAMINSKI <pkamis@merc.pb.bielsko.pl>
Bielsko-Biala, Poland - Friday, February 13, 1998 at 08:09:52 (EST)

Excellent site for students and teachers too!Suggestion: increase the gallery of pictures.
Ricardo Mendes Leal Neto <lealneto@baitaca.ipen.br>
São Paulo, SP Brazil - Friday, February 13, 1998 at 06:39:09 (EST)

Very Informative site. Great content.
David Stegall <stegallama@worldnet.att.net>
Portsmouth, VA USA - Wednesday, February 11, 1998 at 19:47:38 (EST)

I am contacting you to let you know that New Delhi, India will be the hostof Metallurgy 98, India’s 2nd International Trade Fair & Seminar (October7-10, 1998). The first fair " Metallurgy 96" was a tremendous success,attracting the participation of 125 leading names in the ferrous andnon-ferrous sectors from 17 countries, including USA, UK, Germany, Japan,Russia, France, Italy and China.. Metallurgy 98 promises similar success onan even bigger scale.Metallurgy 98 has been accorded official certification by the U.S.Department of Commerce. This is the only fair in Asia in the Metal Sectorcertified by U S DOC. Metallurgy 98 is also supported by VDMA of Germany.Exhibitors are expected from around the world in the fields of MetalTechnology, Metallurgical Equipment, Metal Working, Refractory Technology,Castings and Forgings, Mining, Environmental Control, Energy Conservation,Research & Development, and Consultancy, Software and Project Management andSupplers to the Steel and Metallurgical Industry.Companies in these areas seeking an entry or in endeavoring to achievegreater market penetration in what is fast becoming the world’s secondlargest emerging market - the Indian subcontinent - shouldn’t miss thisopportunity to share their wares and expertise. Concurrent to Metallurgy 98Trade Fair, there will be International Technical Seminars of value toparticipants from all over the world. ( For a list of topics and the seminarpresenters, as well as information on the Trde Fair, please see the website,http://www.indiaintl.com/shows.html ).If your international marketing people need a brochure and application form,they are cordially invited to contact me.I may add that U S Commerce Secretary, William Daley, recently returned froma very successul visit to India leading a business delegation - the largestU S Commerce Department trade mission ever. His report: “India is poised tobe one of the 21st century’s global economic powers”.
Ram Narayanan <janaky@indiaintl.com>
Kenmore, NY USA - Wednesday, February 11, 1998 at 12:36:50 (EST)

Very good examples. Motorola Penang uses a lot of copper alloys, hence would love to see more examples of copper metallography. Thanks.
Lisa Lee (MQE Motorola Penang) <R14651@email.mot.com>
Penang, Malaysia - Wednesday, February 11, 1998 at 01:28:30 (EST)

wonderfull page ! has helped me a lot in my metallurgy I lab courses
Jose E CAstillo <aldren@hotmail.com>
Panama, pa PA - Sunday, February 08, 1998 at 18:11:01 (EST)

Very Good,I'll visit it more often. You know that in this way I can get up date with the news on metallography. Being a graduate from Metalurgical Department, it's cool to catch up with the technology. As not many book about metallography available in Indonesia. Thank you. Regards, Meity
Meity Mandagie <MMandagie@yahoo.com>
Jakarta, Indonesia - Thursday, February 05, 1998 at 10:42:07 (EST)

This is an excellent site which offers a good variety of metallurgical data and tools that are applied in our daily work!
Terry J. Vrooman <vroomant@pgg.mcdermott.com>
Cambridge, ON Canada - Wednesday, February 04, 1998 at 12:53:11 (EST)

A very nice site dedicated to metallography.I will bookmark it for reference in the future.
Chris Caputo <chris.caputo@struers.com>
Cleveland, OH USA - Tuesday, February 03, 1998 at 11:39:44 (EST)

First time visitor. Interesting.
John P. Jendrzejewski, Ph.D. <metserco@concentric.net>
Louisville, KY USA - Monday, February 02, 1998 at 23:50:31 (EST)

Very interesting site. Keep up the good work. Thanks
Andy Galbreath <JAGandGG@aol.com>
Dayton, OH USA - Monday, January 19, 1998 at 22:25:58 (EST)

U.A.B. Materials Engineering Student
Mason B. Frazier <frazim16@eng.uab.edu>
Birmingham, AL USA - Monday, January 12, 1998 at 18:56:35 (EST)

none
Mason B. Frazier <frazim16@eng.uab.edu>
Birmingham, AL USA - Monday, January 12, 1998 at 18:52:59 (EST)

Hi,ya all!!This is a very interesting thing.And i am just looking for some information on Titanium
kristine kronstad <non>
porsgrunn, Norway - Monday, January 12, 1998 at 06:41:33 (EST)

I'm glad I found your site. So often one has to go in cirles to find an answer quickly available from experts.
Dilys M. Henry Ph.D. <DHGwaith@aol.com>
Richmond, VA USA - Saturday, January 10, 1998 at 13:49:18 (EST)

Just found this site...one of my new favorites!
Wendy Davis <kdavis@ncentral.com>
USA - Thursday, January 08, 1998 at 18:00:46 (EST)

I don't want to be ridiculous but I was searching for a company to find the chemical "syton" which my wife (she is a sculptress) uses for shell casting.Any kind of help will be welcomed.
osman tansel <osmantan@efes.net.tr>
bursa, turkey - Thursday, January 08, 1998 at 16:53:47 (EST)

Hi Rich Carrano,I finally found the site. I guess I wasn't using two "l's".The last time we spoke you mentioned that you were working on a new sterling alloy. How's that coming? I do so much sterling casting and having an alloy that bypasses firescale concerns (with the silicon problems) would be a great boon to my customers and therefor to myself. Let me know if I can do some product testing in my shop for you. I'm using the alloy that Michol suggested and having good results. Thank her for me if you remember. Thank you. John, J.A. Henkel Co.,Inc
John A. Henkel <jahenkel@netquarters.net>
Brunswick, ME USA - Tuesday, January 06, 1998 at 08:34:00 (EST)

Felicitaciones, es sencillamente grandiosa su página web,sumamente útil para estudiantes de ingeniería de Materiales como yo, que siempre requeriremos de información reciente e interesante para el desarrollo de nuestras carreras. enhorabuena
Pedro Delvasto <pedelvasto@rocketmail.com>
Caracas, DF Venezuela - Saturday, January 03, 1998 at 23:17:03 (EST)

I´ve just reached your site.It´s impressive!I´m responsible for the R&D metal labs at our company.Our company is producing specialty steels and alloys.Thanks
Barbosa, Celso A. <celsoa@villares.com.br>
Sumaré, SP Brazil - Friday, December 26, 1997 at 11:35:37 (EST)

good info - saves what others pay in courses and seminars - providesimmediate results.
RogerRichbug <richburg@tarheel.net>
salisbury, NC USA - Sunday, December 14, 1997 at 08:05:20 (EST)

This is a great page, and I learned more about the metallography that before.
Victor Susanto <goet@iastate.edu>
AMES, IA USA - Saturday, December 13, 1997 at 00:54:57 (EST)

looking for a good basic copper etch also any information on cutting annealed copper. I've been cutting for 4 days!
Dorrance McLean <dmclea@sandia.gov>
USA - Friday, December 05, 1997 at 16:31:00 (EST)

Thanks for the links to Structure Magazine. I also noticed in your FAQ room that people have requested books about metallography. Struers offers the Metalog Guide free of charge to qualified metalllographers. The Metalog Guide is a complete information resource designed to help metallographers perform grinding and polishing more effectively. It is also available on-line at our website. Please feel free to link to this site. I hope that you will contact me if you have any questions. ThanksChris SopkoDirector of MarketingStruers Inc.
Chris Sopko <csopko@clevelandoh.com>
Westlake, OH USA - Friday, December 05, 1997 at 07:51:12 (EST)

I found this site really interesting as an engineer and also as a manager of a cast iron foundry. I've already given your internet address to one of the best organised government institution in Turkey to follow up...
ALI H. AKBAS <aakbas@atlas.net.tr>
ankara, TURKEY - Sunday, November 30, 1997 at 12:52:07 (EST)

Nice. I would like to see images of some welded samples.Nickel based superalloys would be nice.
Mark Mruczek <mruczemf@pweh.com>
North Haven, CT USA - Tuesday, November 25, 1997 at 15:53:10 (EST)

I find your website very informative. Thank you.I am about to complete my MA in Creative Writing,and I'm very interested in material science. Would anyone know of writing/editing/proofreading opportunities available in the materials field?
Owen Pietrokowsky <opietro@sfsu.edu>
San Francisco, CA USA - Monday, November 24, 1997 at 19:49:10 (EST)

Inventor in many fields, Surfing the net. Started w/ ASM and found your link. Thanks for doing a service for us all.
Mark A. Andrews <fiberman@concordnc.com>
Concord, NC USA - Friday, November 21, 1997 at 17:23:56 (EST)

Wow. Lots of new features since the last time I visited. Very interesting and helpful, Jeff.
Sally Cook <cook.sally@a1.dep.pa.state.us>
E-town, PA USA - Thursday, November 20, 1997 at 11:23:29 (EST)

I'm going to be working as a technician in a newly established met. lab. This is my first visit to this sight. Hope it will teach me some things. Will let you know.
Mark Cooper <mjc@hou.stress.com>
Houston, TX USA - Monday, November 17, 1997 at 19:04:52 (EST)

Nice website. I imagine you could put a great collection ofcatalogued micrographs as in ASTM handbook. It will be muchmore accessible and fast. An encouraging start for materialsrelated sites. I would defenitely put it on my website.
Pramod Agrawal <pramod@mail.org>
Columbus, OH USA - Sunday, November 16, 1997 at 20:20:18 (EST)

this very good idea, I send information about you to other, best regards for all
Krzysztof Jan Huebner, Foundry Research Institute <hubner@IOd.krakow.pl>
KRAKOW, POLAND - Thursday, November 13, 1997 at 02:57:00 (EST)

Engineering technician just starting to learn about metallography
Paul Kace <kacep@osi.sylvania.com>
Hillsboro, NH USA - Wednesday, November 12, 1997 at 16:18:02 (EST)

We are into the mfr of tungsten rods and wires. We extensively use AASP for all metallographic works.Would seek discussions with the fraternity.Rgds,Dr. Vijayshankar,Manager - OperationsAvasarala Tungsten Limited,70, Hootagalli Indl Area,Mysore 571186IndiaFax: +91 821 402191
Dr. Vijayshankar M.N. <prasad@giasbg01.vsnl.net.in>
Mysore, Kt India - Friday, November 07, 1997 at 05:06:27 (EST)

Good website. Very informative. easy to use.
alex link <alex.link@mailexcite.com>
ridgeland, wi USA - Tuesday, November 04, 1997 at 16:05:10 (EST)

no comments
Robert Davis <robdavis@mse.ogi.edu>
Portland, Or USA - Monday, November 03, 1997 at 21:23:18 (EST)

Happy Halloween!
Scarlett <scarlett@home.net>
USA - Friday, October 31, 1997 at 18:48:58 (EST)

I'm a student of the Simon Bolivar University, studying mylast years of metallurgical Engeneering.
Zoraina George <Zgeorge@usb.ve>
Caracas, Venezuela - Thursday, October 30, 1997 at 02:26:32 (EST)

ý am a stundent from kocaeli uni. of mec. eng.
ÖZGÜR MAVÝÞ <omavis@sim.net.tr>
ÝZMÝT, TURKEY - Tuesday, October 28, 1997 at 22:18:23 (EST)

A new website for me. I must check it out before commenting.
Thomas L. Peters <Thomas.L.Peters@lmco.com>
King Of Prussia, PA USA - Tuesday, October 28, 1997 at 15:38:34 (EST)

IN SPANISHDeseo información sobre mineralurgia ustedes me podrian ayudares para mi tesis de grado, con enfasis en ultima maquinaria utilizada en mineralurgia.
Jorge Andres Gallo Betancur <ieteam@medellin.impsat.net.co>
medellin, Colombia - Saturday, October 25, 1997 at 16:00:28 (EDT)

No comments yet but I'll be back! Researching all and everything about solderingprocess from atomic level to SMT & Wave.
j gajduko <gajduko@ctron.com>
Rochester, NH USA - Friday, October 24, 1997 at 11:17:48 (EDT)

Just found this web site: No comment until I browse around.
John S. DIckey <john_dickey@macktrucks.com>
Hagerstown, MD USA - Friday, October 24, 1997 at 08:54:25 (EDT)

Buehler Ltd. Sales Engineer for WA, OR, ID, UT, MT, & AK.
Mike Leahy <mikeleahy@compuserve.com>
Seattle, WA USA - Wednesday, October 22, 1997 at 18:07:33 (EDT)

Thanks for this wonderful site. I'm dreaming to continue our investigations of heat treament of rolls for hot and cold rolling mills with the help of this site. Good luck to averybody!
Natalia Nemzer <termo@mail.admiral.ru>
S.-Petersburg, Russia - Tuesday, October 21, 1997 at 11:31:42 (EDT)

Great idea
Chris Butcher <butcher@mcmaster.ca>
Hamilton, ON Canada - Thursday, October 16, 1997 at 17:51:59 (EDT)

VERY IMPRESSIVE, PACKED WITH MAXIMUM INFO YET STRANGELY COOL AT THE SAME TIMEA MASTERPIECE.
DWIGHT PIERRE <pierred1@hotmail.com>
arima, n/a TRINIDAD&TOBAGO - Wednesday, October 15, 1997 at 09:33:44 (EDT)

1, INFORMATION ON SUPPLIERS OF PIEZOELECTRIC & ELECTOSTRICTIVE MATERIALS REQUIRED. 2, INFO ON BRAZING MATERIALS FOR GAS TURBINES BLADES,SPECIFICATIONS & SUPPLIERS SOUGHT.
NADEEM MOEEN <karam@khi.compol.com>
KARACHI, PAKISTAN - Tuesday, October 14, 1997 at 07:27:43 (EDT)

your website kicks nuts
bob mcenzie <bob@unet.com>
wahoo, ne USA - Thursday, October 09, 1997 at 12:37:27 (EDT)

As a materials engineer and as I am involved in research activity, I would like to update myself by gathering information all around the world and hence signing this log book.ThanksParag
Parag M. Kansara <parag.kansar@mailexcite.com>
BOMBAY, INDIA - Thursday, October 09, 1997 at 07:51:20 (EDT)

Senior Materials Engineer - Chevron Research & Technology Company
Sam Mishael <smis@chevron.com>
Concord, CA USA - Wednesday, October 08, 1997 at 17:48:04 (EDT)

METALLURGICAL LABORATORY SUPERVISORCLIMAX RESEARCH SERVICESFARMINGTON HILLS, MI248 489 0720
Rodney L. Bentz Jr. <RBENTZ6857>
GRAND BLANC, MI USA - Tuesday, September 30, 1997 at 22:21:29 (EDT)

METALLURGICAL LABORATORY SUPERVISORCLIMAX RESEARCH SERVICESFARMINGTON HILLS, MI248 489 0720
Rodney L. Bentz Jr. <RBENTZ6857>
GRAND BLANC, MI USA - Tuesday, September 30, 1997 at 22:21:24 (EDT)

hej ludzie z Polski, pozdrowienia z Toronto przysyla byla Glogowianka. W Glogowie mieszkalam na ul. Sienkiewicza.Na razie, Calusy dla Anny, Zebka, Palki
Katarzyna Ciura <no E- Mail>
Toronto, Ont Canada - Monday, September 29, 1997 at 20:40:35 (EDT)

Currently Researching Fatigue Crack Initiation in Aluminium6061-T6 under combined bend and torsion.
Dave Carson <dsewell-carson@plymouth.ac.uk>
Plymouth, ENGLAND - Monday, September 29, 1997 at 08:51:41 (EDT)

It is an excellent idea to have such a website to promote interaction in Materials' field.
Prof. Kulkarni Milind <civil@giaspn01.vsnl.net.in>
Pune, India - Sunday, September 28, 1997 at 13:33:41 (EDT)

HI JEFF, THANK YOU FOR EVERYTHING CONCERNING THIS SITE, IT'S GREAT.I am highly interested in metallography (of metals principally), and I wisch to find some job propositions in a lab.I am a new U.S. resident, still studing english but i think experience dont need to much speech. thank you for your proposals.
MECIF <CLEWKF@AOL.com>
TUCSON, AZ USA - Saturday, September 27, 1997 at 12:39:36 (EDT)

Very interesting and usefull
M. Luisa Castaño <luisa.cas@ciemat.es>
MADRID, SPAIN - Friday, September 26, 1997 at 06:06:58 (EDT)

I`am very busy with the investigation of (non-)metals and virtual Photo-micrographics of material structures.Thank you for this website.
J.C. Smith <j.c.smith@pl.hanze.nl>
Groningen, Holland - Sunday, September 21, 1997 at 06:49:00 (EDT)

To whom am I addressing? Where are you and who are you and all that?? Stan
Stan Beitscher <SBeitscher@aol.com>
USA - Thursday, September 18, 1997 at 01:06:15 (EDT)

Please send details on Minerals and raw materials
Dr. I. H. Khan <khan@mintech.edunet.sdnpk.undp.org>
Lahore, Pakistan - Tuesday, September 16, 1997 at 11:45:06 (EDT)

maker of hand forged high carbon steel knives. Intrested in all aspects of heat treating and temper . Very good site for information. thank you.
r.d.guess <rguess@hotmail.com>
fernandina bch. , fl USA - Tuesday, September 09, 1997 at 00:11:22 (EDT)

Just checking things out. Electronics is my primary interest.Failure analysis has got me interested in metallurgy.
Andrew Stearns <afstearns@datel.com>
Mansfield, Ma USA - Saturday, September 06, 1997 at 01:14:04 (EDT)

I work at the Pontifical Catholic University of Peru and I head of the Metallography Laboratory at the Corrosion and protection Institute.I like very much your home page and I would like to maintain contact with you at any time for any question. Thanks a lot.
VICTOR G. ANDRADE <vandrad@pucp.edu.pe>
Lima, PERU - Friday, August 29, 1997 at 13:24:29 (EDT)

Very interesting.Allows me to get to know the full names of the elements.Useful when I carry out SEM/EDX analysis.Thank you for the web page effort.
TC Tan <fsga1407@email.mot.com>
Singapore - Thursday, August 21, 1997 at 05:44:28 (EDT)

Thank You.
James E. Wilderman <james.wilderman@srs.gov>
Augusta , GA U.S.A. - Wednesday, August 20, 1997 at 16:49:12 (EDT)

I think the site is very useful, especially the vendor pages.
Darian Patterson <dspatterson@cclufkin.com>
Lufkin, TX USA - Sunday, August 17, 1997 at 00:12:55 (EDT)

Failure Analysis Technician at Magnetek
Kelly Schauf <kschauf@magnetek.com>
Wauwatosa, WI USA - Thursday, August 14, 1997 at 10:23:31 (EDT)

I found your site interesting
Eng. Razvan Grigoroiu <rgrigoro@pcnet.pcnet.ro>
Bucharest, - Romania - Monday, August 11, 1997 at 12:16:53 (EDT)

I found your site interesting
Eng. Razvan Grigoroiu <rgrigoro@pcnet.pcnet.ro>
Bucharest, - Romania - Monday, August 11, 1997 at 11:42:28 (EDT)

Look forward to obtaining vast info from site.
Frank Bigham <fbigham@brownintl.com>
Huntsville, Al USA - Friday, August 01, 1997 at 09:56:34 (EDT)

I am interested in finding a source that I can use to get material specifications.
Frank Bigham <fbigham@brownintl.comHuntsville>
Huntsville, Al USA - Friday, August 01, 1997 at 08:04:13 (EDT)

Very nice, well set out, user-friendly!!
Thomas Johnstone <BBU5104@ccsun.strath.ac.uk>
Glasgow, Scotland - Thursday, July 31, 1997 at 12:32:45 (EDT)

*
John Gillies <johng@nait.ab.ca>
Edmonton, AB CANADA - Wednesday, July 30, 1997 at 11:15:54 (EDT)

Coool! Great web page, Pfeff!Love, jill
sister jill <jilling@aol.com>
Santa Cruz, ca USA - Friday, July 25, 1997 at 11:04:05 (EDT)

looking forward to a better day.
Spencer Phillips <phis@NTSB.gov>
washington, dc USA - Wednesday, July 16, 1997 at 17:36:15 (EDT)

Good job!
Rich Lee <gentlei2enteract.com>
Lemont, IL USA - Saturday, July 12, 1997 at 09:07:42 (EDT)

Your sight looks very good! Thanks for including us.
David J. Fitzgerald <psi@net1.net>
Houston, TX USA - Saturday, July 05, 1997 at 13:09:54 (EDT)

Hello! You have a great website here. I work in the Engineering Department of a subcontractor for printed circuit assembly. Does anyone know of alternative techniques for soldering nickel-palladium finished components?
Neil S. Morelos <eai-eng@globe.com.ph>
Manila, Philippines - Saturday, July 05, 1997 at 05:31:00 (EDT)

Great site...your contest micrographs keep me guessing!
Bill Kaiser <bill.kaiser@snrichards.com>
Memphis, TN USA - Thursday, July 03, 1997 at 08:16:23 (EDT)

kind regards from the Max-Planck-Institut for metals research. Your site is really nice. ho
Horst Opielka <Horst_Opielka@MagicVillage.de>
Stuttgart, Germany - Friday, June 27, 1997 at 08:42:39 (EDT)

As a matter of fact this is my first visit to this site. My major is metallurgy, so it's very impressive. Especially the photographs of metals are very helpful. However I had some small problems. First, I tried to find the information about biomaterials using for dental and implant materials, but it was not easy to me. I need secondly more photo's captions which explain the composition, heat treatment, taking year and so on.
Seung-Hee, Yoo <rampo@unitel.com.kr>
Kyunggi, Ilsan, S.Korea - Tuesday, June 24, 1997 at 21:18:32 (EDT)

Looking for imfo on Palldium Oxide
Ron Snow <rsnow@lanl.gov>
LosAlamos, NM USA - Wednesday, June 18, 1997 at 12:51:14 (EDT)

My company was started 15 months ago to offer, amongst other things, in-plant heat treatment education on a customised basis. I am also involved with pulsed plasma nitriding, and pulsed plasma carburising, in conjuction with high pressure gas quenching using helium and nitrogen as the quench medium
David Pye <pyemet @toolcity.net>
meadville, pa USA - Thursday, June 12, 1997 at 17:43:00 (EDT)

Great Site! Gives me ideas for ours....
Chris Kailhofer <kailhofer@engr.wisc.edu>
Madison, WI USA - Wednesday, June 11, 1997 at 15:12:35 (EDT)

testing
Al <Al@work.net>
USA - Sunday, June 08, 1997 at 14:11:45 (EDT)

We license a technology to anodizing firms that includes chemical additive, computer process control system, training and education at our Tech Center, research and technical support, and marketing support to anodizing users.
Len Semas <LSemas@metalast.com>
Minden, NV USA - Saturday, June 07, 1997 at 16:44:23 (EDT)

This is an interesting area. I inestigate the microstructures of Aluminium with TEM and REM. Anyone else out of there doing this kind of work ? Let's discuss.
Hairul Abral <abral@ww.uni-erlangen.de>
Erlangen, Germany - Saturday, June 07, 1997 at 13:34:09 (EDT)

would like table of contents of various journals on the subjects of mettalurgy, matrials science, engineering.
Lois Rockwell <lrockwell@tambcd.edu>
Dallas, TX USA - Friday, June 06, 1997 at 14:18:25 (EDT)

Residual Stess
Onofrio G, Mollica <oniemo@snet.net>
Newington, ct USA - Wednesday, June 04, 1997 at 23:19:08 (EDT)

Great site, keep up the good work. I am a Materials science student at the university of Cincinnati. Great work.
David Collins <bearcat2@ix.netcom.com>
Cincinnati, OH USA - Monday, June 02, 1997 at 21:56:08 (EDT)

GREAT JOB
JIM GARDINI <JGAR@AOL.COM>
SHELBY, MI USA - Thursday, May 29, 1997 at 20:50:29 (EDT)

Excellent Job, Thanks for all the information. I€m working with LEAD ALLOYS. I'm starting in metallography
Francisco J. Gonzalez M. <francgzz@mail.grupoimsa.com>
Monterrey, NL Mexico - Tuesday, May 27, 1997 at 08:24:23 (EDT)

GREAT STUFF, Are you interrestet in more pictures? Area: any kind of steel and alloyed steel What sort of picture-form and -resolution do you need?
Thorsten Hofbauer <Hofbauer@TST.Thyssen.com>
Duisburg, NW Germany - Wednesday, May 14, 1997 at 10:40:15 (EDT)

Hello Jeff!
george f. vander voort <105502.637@compuserve.com>
lake bluff, il USA - Monday, May 12, 1997 at 18:00:56 (EDT)

Jeff.... I believe we met at the Santa Fe Symposium? I certainly have enjoyed your site. Excellent job. Thanks for all the info. Paul Finelt, Michael Anthony Jewelers, Inc., Mt. Vernon, NY
Paul Finelt <72567.3274@compuserve.com>
Demarest, NJ USA - Thursday, May 08, 1997 at 20:56:45 (EDT)

Great site.
Jennifer Jacobs <rikit@ibm.net>
Slidell, LA USA - Tuesday, May 06, 1997 at 18:04:13 (EDT)

I am first time here.I am a student of metalurgy, and I am happy thet this site exist.
Kowalik <remik@mops.uci.agh.edu.pl>
Glogow, Poland - Friday, April 25, 1997 at 05:32:54 (EDT)

I am looking to hire an experienced metallurgist and was hoping to post a "help wanted" sign.
valter ezerins <valterezerins@mail.ih.navy.mil>
Indian Head, MD USA - Wednesday, April 23, 1997 at 10:28:41 (EDT)

Nice Web Site.
Doug <doug.evenden@MCI2000.com>
Dayton, OH USA - Tuesday, April 22, 1997 at 21:24:47 (EDT)

This is my first visit, but I'm sure I'll be back.
Mary Maryott <maryott@worldnet.att.net>
Rome, pa USA - Tuesday, April 22, 1997 at 20:30:09 (EDT)

Nice lab! Biel School of Engineering Metallography Lab
J. Schaad <joerg.schaad@isbiel.ch>
Biel, CH - Friday, April 18, 1997 at 09:20:43 (EDT)

Looking for information on material properties
Scott Jensen <jensens@morganut.com>
Morgan, UT USA - Wednesday, April 16, 1997 at 17:39:23 (EDT)

I am a ME student and also an engineering assistant look for info on steels and brass. Can you help me?
Anthony Young <AYoun89781@aol.com>
Livonia, Mi USA - Saturday, April 12, 1997 at 16:45:22 (EDT)

Hi George - You're web site is very impressive.
Karen Witkoski <dudley@oasys.dt.navy.mil>
West Bethesda, MD USA - Friday, April 11, 1997 at 07:30:09 (EDT)

Just signing
Paul Reidel <reidel@wavenet.com>
Huntington Bch., CA USA - Wednesday, April 02, 1997 at 18:08:05 (EST)

I am a Metallurgist Engineer and I would like to receive more information about the organization.
Marcos de Paula Ferreira <marcospf@mandic.com.br>
Sao Paulo, SP Brazil - Saturday, March 22, 1997 at 21:22:10 (EST)

Metallography is an art.
Kurt Schenk <KurtSchenk@aol.com>
Plymouth, Mn USA - Thursday, March 20, 1997 at 15:14:01 (EST)

Enjoying this site immensely. It's the first one I've seen dedicated to Metallographers. Keep up the good work. Will consider submitting something of interest.
Stephanie Strackman <leecee@icanect.net>
Ft. Lauderdale, Fl USA - Sunday, March 16, 1997 at 18:02:33 (EST)

Was just cruising around looking for info on brass. We had an opp's at work and are looking for a heat treat fix on some parts.
John Evangelisti <Johne2telis.org>
Sacramento, CA USA - Saturday, March 15, 1997 at 20:00:38 (EST)

Excellent Web Site! Keep me informed of forthcoming events.
Khershed P. Cooper <cooper@anvil.nrl.navy.mil>
Washington, DC USA - Friday, March 14, 1997 at 13:45:36 (EST)

I'm maintain free microscopy vendors database (more than 1100 companies, with more than 300 web address).
Henrik Kaker <Henrik.Kaker@guest.arnes.si>
Ravne, Slovenia - Wednesday, March 12, 1997 at 03:31:38 (EST)

Great web site! I've really enjoyed it. I investigate / defect analysis on beer cans! Well actually soda cans and the lids as well. Work for a large aluminum producer of canbody stock aluminum alloys. Anyone else out there doing this kind of work? Let's discuss.
Zeke <Lakeeffect@msn.com>
Oswego, NY USA - Tuesday, March 11, 1997 at 20:54:11 (EST)

This looks like an interesting area , I also did'nt get the pictures.
Brenda <nokick 89@aol.com>
USA - Monday, March 10, 1997 at 18:31:44 (EST)

Nice site. Metallurgist in Ferrous foundry Cape Town. Anybody have info on nodular alignment in Ductile Iron. I would also like to hear about your queries Cheers from sunny South Africa
Peter du Plessis <pdp4@iafrica.com>
Cape Town, South Africa - Monday, March 10, 1997 at 14:46:03 (EST)

(acting) Scientific Marketing Manager at Polaroid. Interesting site -- how would we get involved as a "vendor"?
Brooks Corl <corlb@polaroid.com>
Cambridge, MA USA - Sunday, March 09, 1997 at 09:14:39 (EST)

I am so exciting that there are so nice area for the discussing about the metallography.
Yuh-Ferng Ger <yfko@ims.mirdc.org.tw>
kaohsiung, Taiwan - Wednesday, March 05, 1997 at 04:20:56 (EST)

Great Site. I need help with obtaining small steel tensile samples.
Rick Ross <rossr@notesmail.durhamc.on.ca>
oshawa, ON Canada - Tuesday, March 04, 1997 at 20:18:32 (EST)

ductile iron foundry analytical chem. technician; also dynamic tear technician
Jim Quintenz <jqueue@aol.com>
Decatur, IL USA - Tuesday, March 04, 1997 at 18:08:08 (EST)

Has anyone got a good technique for preparing silica coated metals for examination?
Bill Gavigan <Bill_Gavigan@Ingerand.ATTMAIL.COM>
Phillipsburg, NJ USA - Tuesday, March 04, 1997 at 15:16:08 (EST)

Nice site
Melissa <map@aol.com>
USA - Sunday, March 02, 1997 at 15:44:48 (EST)

CAST IRON SHRINK RULE
PHILIP METCALF <prm@montalvo.com>
PORTLAND, ME USA - Thursday, February 27, 1997 at 11:04:43 (EST)

Presently employed by Midstates Analytical Laboratories,
sheldon rudin <luvpearl@wiltel.net>
Tulsa, OK USA - Friday, February 21, 1997 at 23:29:24 (EST)

n/a
Sam Pennington <pennsam@msn.com>
Belmont, NC USA - Tuesday, February 18, 1997 at 20:41:25 (EST)

I am a Materials Engineering student at California Polytechnic state University studying Metallography. I plan on entering the contest this year.
James Martin Jr. <jrmartin@calpoly.edu>
SanLuis Obispo, Ca USA - Friday, February 14, 1997 at 01:31:57 (EST)

I'm really impressed. I enjoyed touring the lab. I hope others send you some more photomicrographs.
Sally Cook <stewart.sally@a1.dep.state.pa.us>
PA USA - Thursday, February 06, 1997 at 16:02:14 (EST)

this is a test
ed <ed@anywhere.net>
USA - Wednesday, February 05, 1997 at 11:01:55 (EST)

this is a test
ed <ed@anywhere.net>
USA - Wednesday, February 05, 1997 at 11:01:23 (EST)

Jeff, The web page is informative and functional.
Todd Leonhardt <todd.a.leonhardt>
Cleveland, OH USA - Monday, January 27, 1997 at 11:20:32 (EST)

An excellent page
E. Whitney <ejw111@psu.edu>
USA - Sunday, January 26, 1997 at 20:41:47 (EST)

More pictures.
Ed <EWenger@gnn.com>
USA - Friday, January 24, 1997 at 22:47:41 (EST)

Nice site, but I need help about termical attack on white iron cast
Cloir S. Silva <cloiruspsc@hotmail.com>
Sìo Carlos, SP Brazil - Thursday, January 23, 1997 at 07:39:04 (EST)

We are new in metalography. We need help, especial metalography atlas
Nedelkovski Mirce <fodbit@ultra.ultra.com.mk>
Bitola, Macedonia - Thursday, January 23, 1997 at 01:59:15 (EST)

NICE, BUT I WANT MORE ABOUT TERMICAL ATTACK ON BANDING MICROSTRUCTURE
FERNANDO MIWA <MIWAUSP@HOTMAIL.COM>
SàO CARLOS, SP BRAZIL - Wednesday, January 22, 1997 at 12:53:02 (EST)

This is a nice idea- but I am not getting the images.
Joseph Zucco <joseph.a.zucco@usppl.mail.abb.com>
Windsor, Ct USA - Wednesday, January 22, 1997 at 08:38:37 (EST)

Nice site, I am really enjoying the microstructure pictures. Thanks.
P.E. Straughan <pstraug@okstate.edu>
Stillwater, OK USA - Sunday, January 19, 1997 at 22:45:51 (EST)

This is the BEST web site I have seen today!! I love it!! I think you need a heart on the door for Valentine's Day. You are doing a great job on this site!!
Susan O'Neill <soneill@aasp.net>
Attleboro, Ma USA - Thursday, January 16, 1997 at 18:25:17 (EST)

Go To:	[Home]	[Vendors]

The Lab Guestbook

Go To:

[Home]

[Vendors]