Re: Etching Al with =<1.0% HF etch

[ Follow Ups ] [ Post Followup ] [ Return to Ask the Experts Metallography Forum ] [ FAQ ]

Posted by Jeff on April 09, 2010 at 09:09:33:

In Reply to: Etching Al with =<1.0% HF etch posted by Robert on April 06, 2010 at 16:31:28:

Check with your chemical hygeine officer, safety administrator, or local authorities.

Follow Ups:


Post a Followup

Name:
E-Mail:

Subject: Re: Re: Etching Al with =<1.0% HF etch

Comments:

[ Follow Ups ] [ Post Followup ] [ Return to Ask the Experts Metallography Forum ] [ FAQ ]