Etching Al with =<1.0% HF etch

[ Follow Ups ] [ Post Followup ] [ Return to Ask the Experts Metallography Forum ] [ FAQ ]

Posted by Robert on April 06, 2010 at 16:31:28:

Is there any special drain requirements when etching with HF etch? Volume of specimens will be low (10 - 20 per week).

Follow Ups:


Post a Followup

Name:
E-Mail:

Subject: Re: Etching Al with =<1.0% HF etch

Comments:

[ Follow Ups ] [ Post Followup ] [ Return to Ask the Experts Metallography Forum ] [ FAQ ]